Chain Lube

Name: Chain Lube
Brand: Shenzhen Sunrise New Energy Co.,Ltd.

7CF® Chain Lube Spray is an aerosol product that can form a Teflon high-strength adhesion lubricating coating after use, contains PTFE, synthetic high heat resistant lubricant. Providing strong lubrication, high anti-friction, excellent rust and corrosion for chains, open gears and exposed metal surfaces etc., chain grease spray protect chains from all angles using 360º Valve Spray.

WHERE TO BUY

CHAIN LUBE FEATURES & BENEFITS

Strong lubrication
High anti-friction and quiet noise
Excellent rust and corrosion inhibitor
Stays put on chains & moving parts
360º valve spray, protect Chains from all angles using 360º Valve Spray
Rich in Teflon, with high-performance solid lubricating properties
Non-Conductive
Compression, vibration and shock resistance
Good penetration, excellent adhesion
No dripping, no side effects on O-ring
Anti-seize, anti-corrosion and waterproof
Even spray, fast and firm adhesion
Resistant to weak acid, alkali and corrosive working environment
Economical use, with the best coverage

CHAIN LUBE APPLICATIONS

Motorcycles, Bikes, Farm equipment.
Industrial: transfer belts, conveyor belts, motors, rollers, wheels, gears, chains & hoists, etc.

DIRECTIONS

Read entire label before using this product.

1
For best results, please use this product on a clean surface.
2
Shake well before spray.
3
Hold the can 5 to 10 cm away from the surface of Stationary or moving parts to be sprayed.
4
Gently spray a uniform layer of film and let it dry for 10 to 15 minutes.
5
Wipe off excess product with a clean cloth.
6
If necessary, repeat spraying.

PHYSICAL & CHEMICAL PROPERTIES OF CHAIN GREASE SPRAY

Physical and chemical properties
Propellant	Hydrocarbon	boiling point	>50°C
Odor	slight aliphatic hydrocarbon odor	Solubility (water)	Negligible
Appearance	yellow oily turbid liquid	Percent volatile	>10%
Internal pressure (25℃, MPa)	0.3~0.5	Ejection rate (%)	≥96
Heat resistance	keep at 40℃ for 24h, return to room temperature, it can be used normally	Cold resistance	keep at (0-5℃) for 24h, return to room temperature, it can be used normally
Specific gravity	0.65 – 0.753	Corrosion (100℃, 3h, T3 copper sheet, 45 steel sheet)	no green or black change