Mold Release (Neutral)

Mold release (Neutral) can effectively prevent the product from sticking to the mold. A layer of isolation film is applied between the product and the mold, making it easy for the product to come out of the mold and improving the smoothness of the product. This product is suitable for demolding industrial products such as plastic, rubber, metal, glass, etc. Its propellants are made of odorless products, non-toxic, and non corrosive.

WHERE TO BUY

Mould Release（Neutral) TDS

TDS & SDS

Mould release (Neutral) SDS

TDS & SDS

MOLD RELEASE NEUTRAL FEATURES & BENEFITS

Multiple demolding times
Quick drying speed
Environmentally friendly and corrosion-free
Not affecting secondary processing

MOLD RELEASE NEUTRAL APPLICATIONS

Suitable for precision products, transparent products, forming and demolding, such as oil spraying, screen printing, electroplating, hot stamping, etc.

DIRECTIONS OF USING MOLD RELEASE NEUTRAL

Read entire label before using this product.

1
Shake well before use.
2
When using it for the first time, the dirt on the inner surface of the mold should be cleaned with mold cleaning agent before drying or blowing dry.
3
After spraying this product, the mold can be heated to a suitable temperature.
4
When spraying this product, the nozzle should be about 20-25 centimeters away from the mold.
5
Try to make the spraying layer thin and uniform as much as possible; During the production process, an appropriate amount of spray can be added as needed.
6
Pay attention to excessive dosage, but the effect may not be significant.

ATTENTION

1. Wash hands thoroughly after handling.

2. Wear protective gloves/clothing & eye/ face protection.

3. Use only outdoors in a well ventilated area.

4. Avoid breathing dust/ fumes/ gas/ mist/ vapors/ spray.

5. Store container tighely closed in a well ventilated place.

6. Do not expose to heat, sparks or open flames. Exposure to high temperature may cause can to burst.

7.Dispose of contents/container in accordance with local/regional/national regulations.

PHYSICAL & CHEMICAL PROPERTIES OF MOLD RELEASE NEUTRAL

Physical state	liquid
Appearance	Aerosolized Mist
Specific gravity	0.70-0.80
Flammability:	Supports Combustion
Flash point (℃)	<0
Solubility in water	Insoluble
PH Value	5.0-6.0