Professional silicone sealant manufacturer 7CF offers high-quality custom silicone sealants. The silicone sealant-neutral is a one-component, neutral curing, ketoxime type, translucent (or other colors required by users), low modulus silicone sealant. It consists of Polysiloxane (45%), Plasticizer (oil) (30%), and Inorganic filler (19%).
As one of the trusted wholesale silicone sealant suppliers, we prioritize quality and customer satisfaction. The neutral silicone sealants undergo rigorous testing to ensure they meet or exceed industry standards, offering excellent performance and durability.
• Neutral curing, non-corrosive.
• Excellent weather aging resistance, UV resistance, ozone resistance and water resistance.
• No primer required, strong adhesion to most building materials, but the surface must be clean and free of oil.
• It is not suitable for construction and use when the surface temperature of the material is lower than 5°C or higher than 40°C, and the temperature remains unchanged at -50°C to 100°C after curing.
• Can be applied to
• The seams of the glass lighting roof are sealed.
• Plexiglass, polycarbonate, sunlight board and other materials light shed seams sealed.
• Coated glass and glass bonded and sealed.
Restricted to
This product is not suitable for structural glazing projects, places continuously immersed in water or wet all the year round, all materials that will seep grease, plasticizers or solvents, places with no ventilation, copper, lead and galvanized metal surfaces, cannot be used on the back of the mirror.
Make sure the use surface is clean and dry (solvent available), remove any impurities or glass glue residue. It can be cleaned with solvents. Pay attention to the use restrictions when using flammable solvents
Use masking tape to cover adjacent surfaces for later finishing and cleaning,
Cut the nozzle to the required size and connect it to the hose. The glass glue must be in good contact with both sides of the interface to ensure that the glass glue can fully fill the interface.
Tear off the tape before the glass glue hardens
The surface of the glass glue is solidified within 5 minutes and will not stick to the hands within 1 hour. The thickness of the solidified glass glue can reach 7mm within 7 days, and the adhesive strength should be achieved. The uncured glass glue can be removed with cloth and solvent (such as turpentine), and the excess cured glue can be removed with a scraper.
Because this silicone sealant is added with plasticizing oil, the plasticizing oil may seep out during use.
Physical and chemical properties | |||
Density: | 1.51~1.57 g/cm 3 | Color: | Clear, White，black |
Sag degree upright and parallel: | No sag when applying | Surface forming time: | ≤15min |
Tensile strength (glue): | ≥0.6mpa | Elongation at break (glue): | ≥400% |
Application Rate: | ≥80ml/min | Shore A Hardness: | 30~41 |
Temperature resistance: | -20℃-100℃ | Shelf life: | 10 months stored in cool and dry place (5℃-27℃） |
Storage Condition： | Below 27 ℃ cool dry and ventilated place, avoid high temperature | ||
ITEM NO. | PACKING |
B-I-004 | 6oz(170g) 24pcs/ctn |
GET IN TOUCH WITH 7CF TO LEARN MORE PRODUCT LINES
English 
Español 
日本語 
한국어 
français 
Deutsch 
italiano 
русский 
português 
العربية 
tiếng việt 
